MSP6737 | GAC 2.7 in. 69mm Thread Length / 6 in. 152mm Harness / Male Push-On Terminals

10VDC (From Speed Control) / Fixed Speed

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

10 Turn / 5KΩ / With Locking Shaft

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

10 Turn / 20KΩ / With Knob

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

Multi-VDC / MTU M-DEC to GAC LSM/SYC

10 Turn / 5KΩ / With Knob

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

24VDC / Standard Unit with Idle

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

DPG100/101-F & DFT200 Handheld Configuration Tool

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

24VDC / Standard Unit

EDG6000 Series - Mating Connector Kit / 14-Terminal

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

Multi-VDC / Temperature Compensated

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203