CH1207 | GAC MSP Automotive Sensors - 10 ft. 3m Shielded Cable / 2-Terminal

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Full-Fuel Starting Aid

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

10 Turn / 5KΩ / With Locking Shaft

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

24VDC / Standard Unit

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

Multi-VDC / Switchable Soft Coupling and Lead Circuit

24VDC / Packard Connector without Mating Connector / Includes GA102

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

M6 I.D. End and Thread

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / Standard Unit

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

Multi-VDC / Overspeed Switch

24VDC / Terminal Strip

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

10 Turn / 5KΩ / With Knob

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless