EAM105 | GAC 24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

24VDC / Standard Unit

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

12VDC / Standard Unit

24VDC / Universal / 4-20mA Input / 0-5VDC Output / Reverse Polarity

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

Multi-VDC / Standard Unit

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

M6 I.D. End and Thread

12VDC / Packard Connector without Mating Connector / Lever Included

Multi-VDC / Light-Force (Low-Current Optimized PID)

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Multi-VDC / Overspeed Switch

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless