HW13-001 | GAC 5-Star Torx Bit - Pump Cover Screws (Service Tool)

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

24VDC / Universal / 4-20mA Input / 0-5VDC Output / Reverse Polarity

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

12VDC / Standard Unit / Flying Leads

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

10VDC (From Speed Control) / Fixed Speed

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

10 Turn / 10KΩ

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

12VDC / Standard Unit

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

M5 I.D. End and Thread 14mm Deep

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

120E4 Series - Fuel Valve Service Replacement Kit

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

24VDC / Packard Connector without Mating Connector / Includes GA102