MSP6724 | GAC 3.45 in. 88mm Thread Length / 3 in. 76mm Harness / Automotive Connector / Aluminum Gold Anodized

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

12VDC / Packard Connector without Mating Connector / Includes GA102

6A / 63V Field

10 Turn / 5KΩ / With Locking Shaft

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

12VDC / Standard Unit / Flying Leads

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

12VDC / Standard Unit

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

Multi-VDC / Temperature Compensated

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

EDG6000 - Programming Interface Assembly with Serial Port

ALN Series - Clevis Kit Only

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

MSP / Engine Speed Simulator, Alligator Clips, General Usage

24VDC / Full-Fuel Starting Aid

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / Deutsch Connector without Mating Connector / Voltage Variable Speed Input 0-5VDC

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Packard Connector without Mating Connector

10 Turn / 20KΩ / With Knob

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized