ESD5221 | GAC Multi-VDC / Overspeed Switch

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

10 Turn / 20KΩ / With Locking Shaft

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Full-Fuel Starting Aid

Multi-VDC / CAT HUEI System to GAC LSM/SYC

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

10 Turn / 5KΩ / With Knob

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

12VDC / Light-Force (Low-Current Optimized PID)

12VDC / Light-Force (Low-Current Optimized PID)

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

24VDC / Light-Force (Low-Current Optimized PID)

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

12VDC / Standard Unit

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector / Lever Included

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires