TP521 | GAC 10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

Multi-VDC / MTU M-DEC to GAC LSM/SYC

10 Turn / 1KΩ

12VDC / Light-Force (Low-Current Optimized PID)

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

USB to RS232 Adapter for PC Interface, GAC Recommended

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

M8 I.D. End and Thread

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / High Temperature Coil for Full Duty Cycle Operation / Not equivalent to Renault 5010438374 which has Saab Connector (Contact GAC for Renault Version)

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

Multi-VDC / Automatic Synchronizer with Sync Check Relay

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

24VDC / Standard Unit

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output