EAM104 | GAC 24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

24VDC / Standard Unit

EDG6000 - Programming Interface Assembly with Serial Port

Multi-VDC / Standard Unit

AFR Series - Mating Connector #1 Kit / 35-Terminal

110 Series - Mating Connector Kit / 2-Terminal

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

5-Star Torx Bit - Pump Cover Screws (Service Tool)

24VDC / Standard Unit / Flying Leads

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

ALN Series - Clevis Kit Only

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

MSP / Engine Speed Simulator, Alligator Clips, General Usage

12VDC / Light-Force (Low-Current Optimized PID)

12VDC / Packard Connector without Mating Connector

Multi-VDC / Overspeed Switch

6A / 63V Field

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)

Multi-VDC / Standard Unit

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)