ADB335F-24 | GAC 24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

24VDC / Standard Unit

110 Series - Mating Connector Kit / 2-Terminal

10 Turn / 10KΩ

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

12VDC / Packard Connector without Mating Connector

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

6A / 63V Field

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

ALN Series - Clevis Kit Only

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

12VDC / Standard Unit

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)