ESD2244-24 | GAC 24VDC / Light-Force (Low-Current Optimized PID)

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

120E4 Series - Fuel Valve Service Replacement Kit

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

24VDC / Standard Unit

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Stainless

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

10 Turn / 1KΩ

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector without Mating Connector

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

24VDC / Terminal Strip

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

M8 I.D. End and Thread

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

MSP / Engine Speed Simulator, Alligator Clips, General Usage

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless