CH1520 | GAC EDG6000 Series - 8 ft. 2.4m Harness / Flying Leads / 14-Wires

10 Turn / 20KΩ / With Knob

24VDC / Full-Fuel Starting Aid

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

12VDC / Packard Connector without Mating Connector / Includes GA102

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

ALN Series - Clevis Kit Only

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

10 Turn / 1KΩ

12VDC / Light-Force (Low-Current Optimized PID)

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

Multi-VDC / Light-Force (Low-Current Optimized PID)

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / Standard Unit / Flying Leads

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307